choosing a monitor
Arcade Monitor Cap Kits
arcade monitor cap kits

Arcade monitor cap kits are easy to make and very cheap! I put together a list of all the capacitors you need to change on your chassis. I buy all my caps from Futurlec and I normally buy the 105°C capacitors and if they don't have one I am looking for I find it on eBay. I list the filter caps in the list but I don't change them. The uf has to be the same but you can always use a higher voltage cap. If you are not too sure what monitor chassis you have you can check out this site What's My Monitor?? Here is a link to Monitor Schematics. Click on the monitor you have for a list of the caps you need!

Sanyo 20 EZV

Location | Cap

c161 = 220uf 16v
c162 = 4.7uf 25v Non-Polarised
c166 = 1uf 50v
c201 = 10uf 50v
c202 = 220uf 16v
c301 = 10uf 50v
c302 = 1uf 50v
c303 = 10uf 50v
c371 SB = 4.7uf 25v Non-Polarised
c372 SB = 4.7uf 160v
c373 SB = 100uf 25v
c374 SB = 4.7uf 160v
c375 SB = 10uf 50v
c377 SB = 22uf 160v
c378 SB = 10uf 160v
c406 = 10uf 160v
c407 = 10uf 160v
c408 = 1uf 160v
c410 = 100uf 160v
c411 = 4.7uf 25v Non-Polarised
c454 = 1uf 50v
c458 = 47uf 16v
c459 = 100uf 16v
c464 = 22uf 50v
c467 = 1uf 160v
c468 = 330uf 50v
c469 = 220uf 25v
c471 = 10uf 160v
c472 = 100uf 160v
c609 = 470uf 16v
c610 = 1uf 160v

Caps Needed

100uf 160v = 2
100uf 16v = 1
100uf 25v = 1
10uf 160v = 4
10uf 50v = 4
1uf 160v = 3
1uf 50v = 3
220uf 16v = 2
220uf 25v = 1
22uf 160v = 1
22uf 50v = 1
330uf 50v = 1
4.7uf 160v = 2
4.7uf 25v Non-Polarised = 3
470uf 16v = 1
47uf 16v = 1