arcademonitor.com
choosing a monitor





Arcade Monitor Cap Kits
arcade monitor cap kits

Arcade monitor cap kits are easy to make and very cheap! I put together a list of all the capacitors you need to change on your chassis. I buy all my caps from Futurlec and I normally buy the 105°C capacitors and if they don't have one I am looking for I find it on eBay. I list the filter caps in the list but I don't change them. The uf has to be the same but you can always use a higher voltage cap. If you are not too sure what monitor chassis you have you can check out this site What's My Monitor?? Here is a link to Monitor Schematics. Click on the monitor you have for a list of the caps you need!

Toshiba D29CR55

Location | Cap

c302 = 220uf 16v
c306 = 1uf 50v
c307 = 220uf 16v
c311 = 220uf 50v
c314 = 220uf 50v
c315 = 470uf 35v
c317 = 2200uf 25v
c401 = 4.7uf 35v
c404 = 10uf 16v
c406 no polarity markings on the board = 1uf 50v
c409 = 1uf 50v
c412 = 100uf 16v
c416 = 470uf 35v
c427 = 100uf 250v
c428 = 100uf 200v
c433 = 100uf 50v
c434 = 1uf 50v Non-Polarised
c438 = 330uf 25v
c439 = 4.7uf 35v Non-Polarised
c447 = 10uf 50v
c448 = 10uf 50v
c908 NB = 100uf 16v
cr01 NB = 47uf 16v
cr02 NB = 47uf 16v
cr03 NB = 47uf 16v
cr05 NB = 100uf 16v
cr12 NB = 3.3uf 50v
cr15 NB = 3.3uf 50v
cr17 NB = 100uf 16v
cr18 NB = 10uf 16v
cr20 NB = 10uf 16v
cr22 NB = 10uf 16v
cr32 NB = 1uf 16v
cr33 NB = 10uf 16v

Caps Needed

100uf 16v = 4
100uf 200v = 1
100uf 250v = 1
100uf 50v = 1
10uf 16v = 5
10uf 50v = 2
1uf 16v = 1
1uf 50v = 3
1uf 50v Non-Polarised = 1
2200uf 25v = 1
220uf 16v = 2
220uf 50v = 2
3.3uf 50v = 2
330uf 25v = 1
4.7uf 35v = 1
4.7uf 35v Non-Polarised = 1
470uf 35v = 2
47uf 16v = 3